When people prepare their vehicle for winter driving, they probably worry about servicing their engine or tires. One important area that is often overlooked is the windshield. With proper care and maintenance, you can keep your auto glass in good condition and avoid a windshield repair or replacement. Here are some simple tips that you can follow this winter to prevent damage to your windshield and keep your auto glass in top working order.



If car window glass near me the source of the noise is the heat shield all you have to do now is to tighten it up. Turn off the engine first then go underneath the car. With your good old screwdriver, tighten all the bolts connected to the heat shield and I mean, every single bolt. While you are already down there, check if the heat shield has been twisted or curved. You can fix a bent heat shield through a pair of pliers or a screwdriver. Pull the heat shield away from the spot where it makes contact with the exhaust pipe.

Those who want to save time and money may choose to repair small blemishes on their own using a repair kit. These can be purchased at any auto parts store or ordered online. In the kit you will find the epoxy resin and the tools to apply this. Care needs to be taken when using these, and the outdoor conditions must be warm and dry. After the repair is done the windshield will need to be able to cure in the sunlight for a few hours before maximum strength is achieved.

If you don't have the time to go to a windshield repair facility on your own, there are mobile windshield repair companies that will come to you. You can easily schedule an appointment with the mobile company to come to your home and fix your windshield on the weekends or come to your job and fix it during your lunch break.

Test your lights. If you notice an improvement-you are done! If it still appears dim or cloudy, you may want to use a special plastic cleaner and wax to give it a higher polish and sheen. These can be purchased at fix auto glass repair repair stores. When using them, be careful not to get any on the rest of the car as it could cause damage. Some masking tape around the headlight border can help protect it. You may want to use a rotary buffer to ensure the smoothest polish possible.

If a rock hits your windshield while you are driving when it is already cracked, this can cause it to shatter too and you will not be able to see the road. Dings and scratches generally won't do this but there is always that risk factor that you have to be cautious about.

Because both rear door windows were inoperable, I assumed that there must have been some other electrical glitch, such as a bad control module. Well, you know what they say about assuming. I did a little internet research and found that the General Module controlled the locks and windows and that sometimes, the relays go bad and need replacing. I found some relays for the General Module and ordered them for $75. They arrived a few days later.

Be sure to choose a licensed glass shop in your area. There are a lot fly by night shops out there. You pay a lot of money for your vehicles so you want quality work at a fair price. Do the homework before you have this procedure done because proper preparation before installing a windshield will keep your car from having rust issues which may cause water leaks.